Free Space Optics

Free Space Optics (FSO) communications, also called Free Space Photonics (FSP) or Optical Wireless, refers to the transmission of modulated visible or infrared (IR) beams through the atmosphere to obtain optical communications. Like fiber, Free Space Optics (FSO) uses lasers to transmit data, but instead of enclosing the data stream in a glass fiber, it is transmitted through the air. Free Space Optics (FSO) works on the same basic principle as Infrared television remote controls, wireless keyboards or wireless Palm® devices.

HISTORY OF FREE SPACE OPTICS (FSO)

The engineering maturity of Free Space Optics (FSO) is often underestimated, due to a misunderstanding of how long Free Space Optics (FSO) systems have been under development. Historically, Free Space Optics (FSO) or optical wireless communications was first demonstrated by Alexander Graham Bell in the late nineteenth century (prior to his demonstration of the telephone!). Bell’s Free Space Optics (FSO) experiment converted voice sounds into telephone signals and transmitted them between receivers through free air space along a beam of light for a distance of some 600 feet. Calling his experimental device the “photophone,” Bell considered this optical technology – and not the telephone – his preeminent invention because it did not require wires for transmission.



Although Bell’s photophone never became a commercial reality, it demonstrated the basic principle of optical communications. Essentially all of the engineering of today’s Free Space Optics (FSO) or free space optical communications systems was done over the past 40 years or so, mostly for defense applications. By addressing the principal engineering challenges of Free Space Optics (FSO), this aerospace/defense activity established a strong foundation upon which today’s commercial laser-based Free Space Optics (FSO) systems are based

Read more »

Mini-Disc

The MiniDisc system was introduced in the consumer audio market as a new digital audio playback and recording system. The introduction time was just ten years after the introduction of the Compact Disc (CD). As is known, CD has effectively replaced the vinyl LP records in the audio disc market. CD technology is based on 16-bit quantization and 44.1-kHz sampled digital audio recording. The CD sound quality was fairly improved compared to any consumer analog recording equipment.

Before starting the CD business, many engineers engaged in the development of the CD solely for its improvement in sound quality, but after the introduction of the CD player into the market, we found out that the consumer became aware of the quick random-access characteristic of the optical disc system. The next target of development was obviously to be the rewritable CD. Two different recordable CD systems were established. One is the write-once CD named CD-R and the other is the re-writable CD named CD-MO.
Sales of cassette tapes had been decreasing since 1989.Even if recordable CD were to be accepted by the consumer, it would still be difficult to break into the portable market. Here, portable compact cassette dominated because of its strong resistance to vibration and its compactness. Clear targets for a new disc system were to overcome these weaknesses. Sony was able to achieve this by introducing a disc system called MiniDisc (MD).

The name, MiniDisc (MD), comes from its size. MiniDisc was developed by as an audio media that combines the merits of both CD (supreme quality) and Tape (recordable). The disc, with a diameter of 64 mm and thickness of only 1.2 mm, is placed inside a cartridge of 72 X 68 X 5 mm. The cartridge protects the disc from exposures and withstand forces eliminating problems that connects with CD (scratches) or tape (tangles). The Minidisc is based on Magneto-Optical technology, which is essentially a method of recording information by using a laser to alter magnetic information on the disc. In order to alter the information, the disc has to be heated to a high temperature, meaning that if left on a desk near a magnet, it should remain unaffected, unless you heat the disc to the required 180°C.

Read more »

Computer Clothing

Wearable computer comprises of a computer built within an ordinary clothing. This transformation allows it to be worn constantly, with the goal of becoming a seamless extension of body and mind. Equipped with various sensors which measure heart rate, respiration, footstep rate etc, the apparatus can function as a personal safety device for reducing crime, as well as personal health monitor for improving health care by encouraging individuals to take an active role in diagnosis and body maintenance. The ‘wearable computer’ apparatus is embedded within nontransparent clothing which provides shielding. Electronic circuits are built entirely out of textiles to distribute data and power and perform touch sensing. These circuits are passive components sewn from conductive yarns as well as conventional components to create interactive electronic devices, such as musical keyboards and graphic input surfaces.

OPERATIONAL MODES

There are three operational modes in this new interaction between human and computer.

Constancy : The computer runs continuously, and is “ always ready to interact with the user. Unlike hand-held device, laptop computer, or PDA, it does not need to be opened up and turned on prior to use. The signal flow from human to computer, and computer to human, runs continuously to provide a constant user interface.

Augmentation: Traditional computing paradigms are based on the notion that computing is the primary task. Wearable computing, however, is based on the notion that computing is NOT the primary task. The assumption of wearable computing is that the user will be doing something else at the same time as doing the computing. Thus the computer should serve to augment the intellect, or augment the senses.

Mediation: Unlike hand held devices, laptop computers, and PDAs, the wearable computer can encapsulate us. It doesn’t necessarily need to completely enclose us, but the concept allows for a greater degree of encapsulation than traditional portable computers. There are two aspects to this encapsulation:

Solitude: It can function as an information filter, and allow us to block out material we might not wish to experience, whether it be offensive advertising, or simply a desire to replace existing media with different media. In less severe manifestations, it may simply allow us to alter our perception of reality in a very mild sort of way.

Privacy: Mediation allows us to block or modify information leaving the encapsulated space. In the same way that ordinary clothing prevents others from seeing our naked bodies, the wearable computer may , for example, serve as an intermediary for interacting with untrusted systems, such as third party digital anonymous cash “cyber wallets”

Read more »

Vo-Cable

Voice (and fax) service over cable networks is known as cable-based Internet Protocol (IP) telephony. Cable based IP telephony holds the promise of simplified and consolidated communication services provided by a single carrier at a lower cost than consumers currently to pay to separate Internet, television and telephony service providers. Cable operators have already worked through the technical challenges of providing Internet service and optimizing the existing bandwidth in their cable plants to deliver high speed Internet access. Now, cable operators have turned their efforts to the delivery of integrated Internet and voice service using that same cable spectrum.

Cable based IP telephony falls under the broad umbrella of voice over IP (VoIP), meaning that many of the challenges that telecom carriers facing cable operators are the same challenges that telecom carriers face as they work to deliver voice over ATM (VoATM) and frame-relay networks. However, ATM and frame-relay services are targeted primarily at the enterprise, a decision driven by economics and the need for service providers to recoup their initial investments in a reasonable amount of time. Cable, on the other hand, is targeted primarily at home. Unlike most businesses, the overwhelming majority of homes in the United States is passed by cable, reducing the required up-front infrastructure investment significantly.
                                                                           


Cable is not without competition in the consumer market, for digital subscriber line (xDSL) has emerged as the leading alternative to broadband cable. However, cable operators are well positioned to capitalize on the convergence trend if they are able to overcome the remaining technical hurdles and deliver telephony service that is comparable to the public switched telephone system.

In the case of cable TV, each television signal is given a 6-megahertz (MHz, millions of cycles per second) channel on the cable. The coaxial cable used to carry cable television can carry hundreds of megahertz of signals -- all the channels we could want to watch and more.

In a cable TV system, signals from the various channels are each given a 6-MHz slice of the cable's available bandwidth and then sent down the cable to your house. In some systems, coaxial cable is the only medium used for distributing signals. In other systems, fibre-optic cable goes from the cable company to different neighborhoods or areas. Then the fiber is terminated and the signals move onto coaxial cable for distribution to individual houses.

When a cable company offers Internet access over the cable, Internet information can use the same cables because the cable modem system puts downstream data -- data sent from the Internet to an individual computer -- into a 6-MHz channel. On the cable, the data looks just like a TV channel. So Internet downstream data takes up the same amount of cable space as any single channel of programming. Upstream data -- information sent from an individual back to the Internet -- requires even less of the cable's bandwidth, just 2 MHz, since the assumption is that most people download far more information than they upload.

Putting both upstream and downstream data on the cable television system requires two types of equipment: a cable modem on the customer end and a cable modem termination system (CMTS) at the cable provider's end. Between these two types of equipment, all the computer networking, security and management of Internet access over cable television is put into place.

Read more »